Same-day service for kitchen and bathroom sinks across Minnehaha County
Sink repair Sioux Falls SD done right the first time
When a sink leaks, clogs, or backs up, you need sink repair Sioux Falls SD that stops the problem today, not next week. We handle kitchen sink repair Sioux Falls and bathroom sink repair Sioux Falls SD for homeowners and businesses across Minnehaha County. Our licensed plumbers carry the parts and tools to fix most sinks in one visit, and we answer the phone 24/7 for emergencies.
Live dispatcherUpfront optionsBacked workmanship
What's included
What our sink repair service includes
Every sink repair call includes a full inspection, a flat price before work starts, and a test of the finished repair. Here is what is covered. If we find something outside this scope, we tell you before we touch it and quote the extra work separately.
Full under-sink inspection
We check the trap, supply lines, shut-off valves, disposal, and drain assembly. We run water, watch for drips, and use a leak detection microphone if the source is hidden. You see what we find before we quote the repair.
Clog removal
We clear sink clogs with a drain snake, auger, or hydro jetter depending on the blockage. Grease, soap scum, and mineral buildup come out fast. If the clog is in the main line, we scope it with a sewer camera to find the real cause.
Leak repair and part replacement
We replace worn washers, O-rings, plumber's putty seals, Teflon tape, and damaged supply lines. For corroded copper pipe or cracked ABS pipe, we cut out the bad section and install new pipe and fittings. Every joint gets pressure-tested.
Fixture and disposal repair
We repair Moen, Delta, Kohler, and American Standard faucets, plus garbage disposals from major brands. That covers cartridge swaps, handle repairs, sprayer fixes, and jammed flywheels. If the unit is beyond repair, we quote a replacement.
Post-repair testing and cleanup
We fill both bowls, run the disposal, and check every joint with a dry rag. The drain runs for 5 to 10 minutes to confirm no weep. We wipe down the cabinet, haul away old parts, and walk you through what we fixed.
Service overview
What sink repair Sioux Falls SD actually involves
Sink repair Sioux Falls SD covers everything from a dripping faucet base to a fully clogged drain line under the cabinet. We pull the trap, inspect the supply lines and shut-off valves, and check the drain assembly for corrosion or cracks. If the clog sits deeper, we run a drain snake or hydro jetter through the branch line. For leaks, we replace worn washers, O-rings, plumber's putty seals, and damaged PEX tubing or copper pipe. Every repair ends with a pressure test and a clean workspace.
Sioux Falls homes deal with hard water that eats through rubber seals and mineralizes drain lines faster than in softer-water cities. Older houses near Downtown and Pettigrew Heights often have original galvanized or ABS pipe that cracks at the trap arm. Newer builds in Prairie Green and Willow Ridge use PVC and PEX, but cheap builder-grade fixtures still fail within a decade. If you have been searching for sink repair in Sioux Falls SD near me, we cover all six ZIP codes and can usually be at your door the same day.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
How our sink repair process works
The process flexes to the condition, but these checkpoints keep decisions clear.
Phone triage
We ask what the sink is doing: leaking, draining slow, backing up, or not draining at all. You get a straight answer on whether to shut off the valve under the sink or the main. We book a window, usually same-day, and text you the tech's name and arrival time.
On-site diagnosis
The plumber inspects the trap, supply lines, shut-off valves, and drain assembly. We run water, watch for drips, and use a leak detection microphone if the source is hidden. You get a flat price for the repair before any work starts, and we explain what failed and why.
Repair or replace
We replace worn washers, plumber's putty seals, Teflon tape, and damaged pipe fittings. If the clog is deeper, we run a drain snake or auger through the branch line. For corroded copper pipe or cracked ABS pipe, we cut out the bad section and sweat in new copper or crimp in PEX tubing.
Test and verify
After the repair, we fill both bowls, run the disposal, and check every joint under the cabinet with a dry rag. We watch the drain for 5 to 10 minutes to confirm no weep. If the sink has a sprayer or filtered water tap, we test those too.
Cleanup and walkthrough
We wipe down the cabinet, haul away old parts, and walk you through what we fixed. You get a written summary of the repair and the workmanship warranty terms. If we spotted a bigger issue, like root intrusion in the main line, we tell you now rather than after it backs up.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Drain snake and auger
Clears grease, soap scum, and mineral clogs from sink branch lines. We use a hand auger for shallow clogs and a powered drum snake for deeper blockages.
Hydro jetter
Blasts through heavy grease and scale with high-pressure water. We use it when snaking alone will not clear the line or when the clog keeps returning.
Sewer camera
Feeds through the branch line and main sewer to find root intrusion, cracks, or bellies. You get a video recording and a written report of what we found.
Leak detection microphone
Picks up the sound of water escaping behind walls or under cabinets. We use it when the leak source is hidden and we want to avoid tearing out the whole cabinet.
Pipe wrench and pipe cutter
Loosens frozen fittings and cuts out corroded copper or ABS pipe. We carry both in every van so we can replace a damaged section on the spot.
Soldering torch and PEX crimping tool
Sweats new copper joints or crimps PEX tubing connections. We match the repair method to the pipe material already in your home.
Pressure gauge
Tests the repaired line under pressure to confirm no joint weeps. We hold pressure for several minutes before we call the job done.
Use cases
When to call for sink repair
These examples show how the service framework adapts rather than forcing every call through one repair.
Bathroom sink drip stopped, cabinet dried
A homeowner in Prairie Green had a bathroom sink that dripped constantly. The cabinet floor stayed damp and the wood was starting to swell. The shut-off valve was frozen open and the supply line had a pinhole leak behind the wall. → We shut off the main, cut out the corroded copper section, and crimped in new PEX tubing. We replaced the shut-off valve and supply line, then pressure-tested the repair for 10 minutes. The drip stopped and the cabinet dried out within a day.
Garbage disposal saved from replacement
A property manager near Downtown Sioux Falls was told by another company that the disposal needed full replacement. The unit hummed but would not spin. The tenant had been running it with a jammed flywheel for weeks. → We cut power, cleared the jam with an auger, and reset the unit. The motor was still good. Total repair time was 45 minutes and the cost was a fraction of a new disposal. The dishwasher drain connection was also loose, so we tightened it.
Problems we solve
Sink problems we solve in Sioux Falls
Most sink calls fall into a handful of categories. Knowing which one you have helps us bring the right parts and finish in one visit. Here are the problems we see most often in Sioux Falls homes.
Slow drain that pools water in the bowl
We run a drain snake or auger through the branch line to clear grease, soap scum, and mineral buildup. For recurring clogs, we scope the line with a sewer camera to check for root intrusion or a bellied pipe. Most clogs clear in under an hour.
Leaking supply line or shut-off valve
We replace worn supply lines with braided stainless or PEX tubing and swap out failed shut-off valves. Every connection gets Teflon tape and a pressure test. Most repairs take 1 to 2 hours, and we check the other sink while we are there.
Cracked P-trap or drain assembly
We cut out the cracked trap and install a new PVC or ABS P-trap with fresh plumber's putty seals. We check the tailpiece and drain flange for corrosion while the trap is off. The repair takes about an hour and includes a full flow test.
Garbage disposal humming but not spinning
We cut power, clear the jam with an auger, and reset the unit. If the motor is burned out, we install a new disposal in about 90 minutes. We test the dishwasher drain connection before we leave.
Pricing process
What sink repair costs in Sioux Falls
$180 - $450 depending on scope
Type of failure
A worn washer or O-ring is a quick fix. A cracked P-trap, failed shut-off valve, or corroded supply line takes longer and adds parts cost. Drain clogs sit in the middle depending on how deep the blockage runs.
Access to the repair
If the shut-off valve is seized or the pipe runs behind a finished cabinet wall, we spend more time on access. Open access under the sink keeps the job simple and the price lower.
Pipe material
Repairing copper pipe means soldering, which takes longer than crimping PEX tubing. Old galvanized pipe often needs a transition fitting to connect to new copper or PEX, adding a step.
Customer reviews
What Sioux Falls customers say
★★★★★
“Our kitchen sink started backing up every time we ran the dishwasher. The tech ran a snake through the branch line, pulled out a grease clog the size of a fist, and showed us the gunk before he left. He also noticed the P-trap was cracked and replaced it on the spot. Total time was about two hours. No more backups.”
★★★★★
“The bathroom sink in our master bath had been dripping for weeks. I figured it was the faucet, but the plumber found a corroded supply line behind the wall. He cut out the bad copper, crimped in new PEX, and pressure-tested it. Flat price, no surprise charges. That was six months ago and it is still dry.”
★★★★★
“I manage six rental units near Downtown, and sink calls are constant. These guys answer the phone at 7 a.m. and usually have a tech out the same day. They fixed a disposal that another company said needed full replacement. Just a jammed flywheel. Saved me $300 and my tenant stopped complaining.”
How much does sink repair cost in Sioux Falls SD?
Most sink repairs in Sioux Falls run $180 to $450 in 2026. A simple faucet cartridge swap or P-trap replacement sits at the low end. Drain snaking, garbage disposal replacement, or cutting out corroded pipe pushes toward the high end. Emergency calls after hours add a dispatch fee. We quote a flat price on site before any work starts.
Why is my sink leaking in Sioux Falls South Dakota?
Hard water is the usual culprit. It eats rubber washers, O-rings, and plumber's putty seals until they fail. Other common causes include loose supply line fittings, a cracked drain assembly, or corroded copper pipe at the trap arm. If the leak only shows when the water runs, the drain side is the problem. If it drips constantly, the supply side is failing.
Can you repair a sink drain in Sioux Falls?
Yes. We repair sink drains across all Sioux Falls ZIP codes, including 57104, 57105, and 57108. That covers clog removal with a drain snake or auger, replacing a cracked P-trap, and fixing slow drains caused by grease or mineral buildup. If the clog is in the branch line or main sewer, we scope it with a sewer camera to find the real cause.
How long does sink repair take in Sioux Falls SD?
Most sink repairs take 1 to 3 hours. A faucet cartridge replacement runs about an hour. A drain snaking or P-trap rebuild takes 1 to 2 hours. If we cut out corroded pipe and sweat in new copper, plan on 3 hours. We give you a time estimate before we start and call if anything changes.
Related services
Related Services
Emergency Plumbing Repair
When a sink supply line bursts at 2 a.m., our emergency plumbers shut off the water, repair the line, and dry the cabinet area. We handle after-hours calls across Sioux Falls, SD, and most addresses see a licensed tech within 90 minutes.
Plumbing Installation
If your sink repair turns into a full replacement, we install new fixtures, supply lines, and shut-off valves. We work with Moen, Delta, and Kohler sinks and follow Uniform Plumbing Code for every connection. One visit covers removal and installation.
Drain Cleaning
A slow sink drain often points to a clog deeper in the branch line. We run a drain snake or hydro jetter to clear grease, soap scum, and mineral buildup. For recurring clogs, we scope the line with a sewer camera to find the root cause.Ready when you are
Need sink repair Sioux Falls SD today?
We answer the phone 24/7 and dispatch licensed plumbers across Sioux Falls and Minnehaha County. Same-day appointments, flat pricing, and a workmanship warranty on every repair. Call now and we will tell you exactly what it takes to fix your sink.
Talk with the local team
Request Sink Repair
Phone is the fastest way to reach us, day or night. A live dispatcher answers 24/7, takes your address and problem, and sends the nearest truck. For routine work we schedule same-day or next-day visits across Sioux Falls and Minnehaha County, including the 57103, 57106 and 57108 ZIP codes.