Copper, PEX, and PVC repiping for older homes and failing water lines
Pipe Replacement Sioux Falls SD Done Right the First Time
When your pipes corrode, leak, or freeze, pipe replacement Sioux Falls SD homeowners trust starts with a call to our licensed team. We handle copper pipe replacement, PVC and PEX upgrades, and main water line replacement across Minnehaha County. Whether you're in a 1920s Craftsman near McKennan Park or a newer build in Willow Ridge, we diagnose the problem, quote the job upfront, and have clean water flowing again fast.
Live dispatcherUpfront optionsBacked workmanship
What's included
What's Included in Our Pipe Replacement Service
Every pipe replacement job includes the essentials: removal of old pipe, installation of new copper or PEX, new shut-off valves, and a full pressure test. We also handle permit paperwork when required. Add-ons like drywall repair or fixture upgrades are quoted separately so you only pay for what you need.
Full Pipe Removal and Disposal
We cut out every foot of failing pipe and haul it away. No piles of old galvanized steel in your yard, no debris left in your crawl space. You get a clean slate and a clean property when we're done.
New Copper or PEX Installation
We install copper pipe or PEX tubing based on your home's layout and your preference. Copper lasts decades and handles high heat; PEX is flexible, freeze-resistant, and costs less. We'll explain the trade-offs and let you choose.
New Shut-Off Valves and Fittings
Every replacement includes new shut-off valves at the main and at each fixture group. We use quality pipe fittings, Teflon tape, and plumber's putty where needed. Old, frozen valves are a common failure point, so we replace them while we're in there.
Pressure Testing and Leak Check
After installation, we pressurize the system and check every joint with a pressure gauge. We run water at every fixture and inspect for drips. You see the results before we pack up. If anything fails, we fix it on the spot.
Permit Handling and Inspection
When Sioux Falls requires a permit for pipe replacement, we pull it and schedule the inspection. Our work meets Uniform Plumbing Code and International Plumbing Code standards, so it passes without a hitch. You get documentation for your records.
Service overview
What Pipe Replacement Sioux Falls SD Really Involves
Pipe replacement means removing failed or failing water supply and drain lines and installing new pipe that meets current code. In Sioux Falls, that usually means swapping corroded galvanized steel or brittle polybutylene for copper pipe or PEX tubing, then pressure-testing every joint before the walls go back up. We cut out the old runs, install new pipe fittings, shut-off valves, and supply lines, and verify flow at every fixture. A typical whole-home repipe takes one to three days depending on house size and how accessible the lines are.
Most calls we get are from homeowners dealing with the same handful of problems: rusty brown water, low water pressure, pinhole leaks behind drywall, or a main water line that finally gave out after decades underground. Sioux Falls sits in a freeze-thaw climate where pipes in crawl spaces and exterior walls take a beating every winter. If you've been searching for pipe replacement in Sioux Falls SD near me and putting it off, the cost of waiting is usually a burst pipe at 2 a.m. and a flooded basement.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
Our Pipe Replacement Process, Step by Step
The process flexes to the condition, but these checkpoints keep decisions clear.
Call and Diagnose
You call, we ask a few questions, and we schedule a visit, often same-day. A licensed plumber inspects your visible piping, checks water pressure with a gauge, and uses a leak detection microphone if we suspect a hidden slab leak. You get a straight answer on whether you need a repair or a full replacement.
Upfront Quote
We price the job before we start. You'll know the cost for materials, labor, and any drywall access needed. No hourly surprises, no change orders halfway through. If we find something unexpected once we open a wall, we stop and tell you before doing anything else.
Protect and Prep
We lay drop cloths, shut off the main, and drain the lines. Furniture gets moved, floors get covered. If we're cutting into drywall, we mark exactly where and keep cuts small and clean so your patching is minimal.
Remove and Replace
Old pipe comes out, new pipe goes in. We use a pipe cutter for clean edges, a soldering torch for copper joints, and a PEX crimping tool for PEX connections. Every fitting gets Teflon tape or plumber's putty where appropriate. This is the bulk of the job, usually one to two days.
Test and Walkthrough
We pressurize the system, check every joint, and run water at every fixture. You walk through with us and see the pressure gauge readings yourself. We don't leave until there's zero evidence of a leak and you're satisfied with the flow.
Tools & methods
Tools and Methods We Use for Pipe Replacement
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Pipe Cutter
Cuts copper, PEX, and PVC cleanly without crushing the pipe. Clean cuts mean better joints and fewer leaks down the road.
Soldering Torch
Used for copper pipe joints. We apply flux and solder to create a permanent, leak-free seal that holds up under pressure and temperature swings.
PEX Crimping Tool
Secures PEX tubing to fittings with a uniform crimp. A proper crimp is the difference between a 50-year connection and a callback.
Pressure Gauge
Measures water pressure at multiple points in the system. We use it before and after replacement to confirm the new pipe is delivering full flow.
Leak Detection Microphone
Listens for the sound of water escaping behind walls or under slabs. It lets us pinpoint hidden leaks without tearing up your home.
Sewer Camera
Inspects drain and sewer lines from the inside. We use it to check for root intrusion, collapsed sections, or debris before and after replacement.
Use cases
When Pipe Replacement Makes Sense in Sioux Falls
These examples show how the service framework adapts rather than forcing every call through one repair.
Slab Leak Reroute in Willow Ridge
A slab leak under the living room floor was driving the water bill up by $80 a month. The homeowner didn't want to break the slab and risk damaging the flooring. The leak had been active for at least three months. → We located the leak with a leak detection microphone, then rerouted the line through the attic and walls. The job took two days. The water bill returned to normal the next cycle, and no concrete was broken.
Emergency Burst Pipe in Pettigrew Heights
A pipe burst in the crawl space during a January cold snap. Water was pooling under the house, and the homeowner shut off the main but couldn't stop the flow completely. It was 6 a.m. and 4 degrees outside. → We arrived within 75 minutes, replaced the burst section, and insulated the surrounding runs. The water was back on by early afternoon. We also checked the rest of the crawl space and found two more vulnerable spots we insulated on the spot.
Problems we solve
Problems We Solve With Pipe Replacement in Sioux Falls
Most pipe problems start small and get expensive fast. Here's what we see most often and how we fix it.
Corroded galvanized pipes turning water brown
We replace the entire galvanized run with copper or PEX. We flush the system, test pressure at every fixture, and confirm the water runs clear before we leave. Most homes see a visible difference the same day.
Frozen pipes bursting during a cold snap
We respond 24/7 to emergency pipe replacement Sioux Falls calls. We shut off the water, replace the burst section, and inspect the rest of the line for freeze damage. We also insulate exposed runs to prevent a repeat.
Low water pressure throughout the house
We diagnose with a pressure gauge at multiple points to find where the restriction is. If the pipe is too far gone, we replace it. If it's isolated, we replace just that section. Either way, you get full pressure back.
Recurring leaks in multiple locations
We recommend whole home pipe replacement Sioux Falls South Dakota when repairs start stacking up. One job, one disruption, and a system you don't have to think about for decades. We quote the full scope upfront.
Pricing process
Pipe Replacement Costs in Sioux Falls
$450 - $12,000 depending on scope
Length of Pipe Run
The more pipe we replace, the higher the material and labor cost. A single fixture line is quick and affordable. A whole-home repipe involves hundreds of feet of pipe and takes days, not hours.
Pipe Material
Copper costs more than PEX but lasts longer and handles higher temperatures. PEX is flexible, freeze-resistant, and less expensive. We'll quote both so you can compare.
Accessibility
Pipes in an open basement are easy to reach. Pipes behind finished drywall, under slabs, or in tight crawl spaces take more time and may require cutting and patching. We tell you upfront what access will involve.
Customer reviews
What Sioux Falls Homeowners Say
★★★★★
“Our 1928 house still had the original galvanized pipes, and the water was coming out brown. Emergency Plumbing Sioux Falls replaced the whole system with PEX in two days. They covered our floors, kept the mess contained, and the water pressure is better than it's ever been. Worth every penny.”
★★★★★
“We had a slab leak that was driving up our water bill. They found it with a leak detection microphone, showed me the reading, and gave me a quote on the spot. Replaced the line under the slab and had us back to normal in three days. No surprises on the bill.”
★★★★★
“Pipe burst in our crawl space during a cold snap in January. They came out at 6 a.m., shut it down, and had the replacement done by that afternoon. The technician walked me through everything and even showed me the pressure gauge after. Honest work.”
How much does pipe replacement cost in Sioux Falls SD?
Most single-line replacements run $450 to $1,800, while a whole-home repipe typically costs $4,500 to $12,000 depending on house size and pipe material. Main water line replacement Sioux Falls projects often land between $3,000 and $8,000. Factors include accessibility, whether we're cutting drywall or concrete, and the length of the run. We quote upfront before any work begins.
When should I replace my pipes in Sioux Falls South Dakota?
Replace pipes when you see rusty water, recurring leaks, or pressure that keeps dropping, or when your home still has galvanized steel or polybutylene. Galvanized pipe typically fails between 40 and 60 years. Polybutylene, common in homes built from the late 1970s through the mid-1990s, gets brittle and fails at fittings. If you're seeing any of these signs, schedule an inspection before winter.
How long does pipe replacement take in Sioux Falls?
A single line takes two to four hours. A whole-home repipe usually runs one to three days for an average Sioux Falls house. Larger homes or jobs requiring significant drywall or concrete work can stretch to four or five days. We give you a realistic timeline during the quote and keep you updated if anything changes once walls are open.
Do you replace galvanized pipes in Sioux Falls SD?
Yes, galvanized pipe replacement is one of our most common jobs. We cut out the old steel, install copper or PEX in its place, and upgrade shut-off valves while we're in there. Most galvanized systems in Sioux Falls homes built before 1960 are past their service life. We can usually complete the swap in one to two days.
Related services
Other Services We Handle Alongside Pipe Replacement
Emergency Plumbing Repair
When a pipe bursts at 2 a.m., our emergency team responds fast. We stabilize the leak, shut off water, and schedule the permanent pipe replacement Sioux Falls SD work for the next available slot. Most emergency calls in the 57103 and 57107 ZIP codes get a same-night response.
Plumbing Installation
New fixtures need compatible supply lines and shut-off valves. When we replace pipe, we often upgrade faucets, toilets, or appliances at the same time. It saves you a second service call and ensures everything matches the new system's pressure and flow ratings.
Drain Cleaning
Old drain lines collect scale and debris. If we're replacing supply pipes, it's smart to hydro jet the drains while walls are open. We use a drain snake or hydro jetter to clear buildup, then a sewer camera to confirm the line is clean before closing up.Ready when you are
Need Pipe Replacement Sioux Falls SD? Call Now
We're licensed, insured, and ready to roll. Same-day quotes, 24/7 emergency response, and upfront pricing on every pipe replacement job. Call now and get your water flowing right.
Talk with the local team
Request Pipe Replacement
Phone is the fastest way to reach us, day or night. A live dispatcher answers 24/7, takes your address and problem, and sends the nearest truck. For routine work we schedule same-day or next-day visits across Sioux Falls and Minnehaha County, including the 57103, 57106 and 57108 ZIP codes.